-- *****************************************************************
-- CISCO-FABRIC-HFR-MIB.my: Cisco Enhanced Benes fabric MIB file
--
-- May 2001, Hongchi Shih
--
-- Copyright (c) 2001-2003, 2006 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************CISCO-FABRIC-HFR-MIB DEFINITIONS::=BEGINIMPORTSUnsigned32,Gauge32,Counter32,Counter64,MODULE-IDENTITY,OBJECT-TYPE,NOTIFICATION-TYPEFROM SNMPv2-SMI
TEXTUAL-CONVENTION,TimeStamp,TruthValueFROM SNMPv2-TC
SnmpAdminStringFROM SNMP-FRAMEWORK-MIB
MODULE-COMPLIANCE,NOTIFICATION-GROUP,OBJECT-GROUPFROM SNMPv2-CONF
PhysicalIndex,entPhysicalIndex
FROM ENTITY-MIB
ciscoMgmt
FROM CISCO-SMI;ciscoFabricHfrMIB MODULE-IDENTITY
LAST-UPDATED"200601010000Z"ORGANIZATION"Cisco Systems, Inc."CONTACT-INFO" Cisco Systems
Customer Service
Postal: 170 W. Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-fabric@cisco.com"DESCRIPTION"Cisco Enhanced Benes fabric MIB module.
This MIB module is used for managing/tracking the Ehanced
Benes Fabric entities and/or fabric related configuration,
state and statistics information.
The fabric entities relationship is shown as follows:
Acronyms and terms:
RP - Routing processor.
DRP - Distributed Route Processor.
LC - Line card.
SFE - switch fabric element.
SFE port - the port of SFE contains a transmitter and/or
receiver to transmit and/or receive data from
backplane.
fabric link - Fabric link.
+-+ +-+
|T1+=====================================>+R|
+-+ single fabric link +-+
A fabric link contains a transmitter T and receiver R.
The transmitter T is in the source SFE port of the fabric
link and the receiver R is in the destination SFE port
of the fabric link.
OIM - Optical Interface Module.
fabric bundle - Fabric bundle is a cable that contains one
or more fabric links for transferring
data between fabric cards.
+-+ +-+
|A+==================/====================+B|
+-+ 1..N fabric links +-+
A fabric bundle cable contains 1 to N fabric links.
One end of the fabric bundle cable is plugged into the fabric bundle
port A of fabric card in Line card rack and the other
end is plugged into the fabric bundle port B on a OIM
of fabric rack for the high speed data transfer between fabric
bundle port A and B.
ingressq - a switch fabric element which queues/segments
packets into cells and sends them into fabric.
fabricq - a switch fabric element which resequences and
reassembles cells from fabric into packets and
forwarding them to the egress interface related
hardware.
fabric plane - Fabric plane is a path from a set of
ingressqs in a RP/DRP or LC card to a set of fabricqs
in other RP/DRP or LC cards for transferring data
between RP, DRP, and LC cards."REVISION"200601010000Z"DESCRIPTION"Replace 'HFR' keyword with 'Enhanced Benes'
Replace 'sponge' keyword with 'fabricq'
Replace 'sprayer' keyword with 'ingressq'."REVISION"200306090000Z"DESCRIPTION"Initial version of this MIB module."::={ ciscoMgmt 257}--
-- The Enhanced Benes fabric MIB consists of the following groups
-- [0] Enhanced Benes fabric notification group
-- [1] Enhanced Benes fabric general information group
-- [2] Enhanced Benes fabric plane group
-- [3] fabric bundle group
-- [4] fabric bundle port group
-- [5] fabric card groupcfhMIBNotifications
OBJECTIDENTIFIER::={ ciscoFabricHfrMIB 0}ciscoFabricHfrMIBObjects
OBJECTIDENTIFIER::={ ciscoFabricHfrMIB 1}cfhGeneral
OBJECTIDENTIFIER::={ ciscoFabricHfrMIBObjects 1}cfhPlane
OBJECTIDENTIFIER::={ ciscoFabricHfrMIBObjects 2}cfhBundle
OBJECTIDENTIFIER::={ ciscoFabricHfrMIBObjects 3}cfhBundlePort
OBJECTIDENTIFIER::={ ciscoFabricHfrMIBObjects 4}cfhCard
OBJECTIDENTIFIER::={ ciscoFabricHfrMIBObjects 5}
--
-- Textual Conventions
----
-- Fabric Plane ID Textual Conventions
--CfhPlane ::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"A unique value, greater than zero, for each fabric plane
in the managed system. It is recommended that values are
assigned contiguously starting from 1."SYNTAXUnsigned32(1..4294967295)--
-- Fabric Bundle ID Textual Conventions
--CfhBundle ::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"A unique value, greater than zero, for each fabric bundle
in the managed system. It is recommended that values are
assigned contiguously starting from 1."SYNTAXUnsigned32(1..4294967295)--
-- Fabric administrative state Textual Conventions
--CfhAdminState ::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"An enumerated value that provides an indication of
the desired administrative state of a fabric entity.
up - bring up the fabric entities.
down - shut down the fabric entities."SYNTAXINTEGER{up (1),down (2)}CfhScaledPercentage ::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"This textual convention represents scaled percentage values
(i.e., percentage values multipled by a power of ten) for
error ratio, resource availability/reliability/connectivity
usage, etc. The UINTS clause associated with each object that
use this textual convention as syntax will indicate the degree
of precision up to industry standard five 9's (i.e., 99.999%)
requirement."SYNTAXGauge32(0..100000)--
-- Fabric General Information Group
--cfhGenPlaneStateTrapEnable OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This object indicates whether cfhPlaneStateNotification
traps should be generated for fabric plane operational
status change. If the value of this object is 'true',
cfhPlaneStateNotification traps will be generated when a
fabric plane operational status transition occurs."DEFVAL{ false }::={ cfhGeneral 1}cfhGenBundleStateTrapEnable OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This object indicates whether cfhBundleStateNotification
traps should be generated for fabric bundle operational
status change. If the value of this object is 'true',
cfhBundleStateNotification traps will be generated when the
cfhBundleOperStatus state transition occurs."DEFVAL{ false }::={ cfhGeneral 2}cfhGenBundleDownedLinkTrapEnable OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This object controls whether cfhBundleDownedLinkNotification
traps should be generated for the downed fabric link in a
specific fabric bundle. If the value of this object is 'true',
the cfhBundleDownedLinkNotification traps will be generated
when the number of downed links in fabric bundle has
transitioned from 0 to 1 or from 1 to 0."DEFVAL{ false }::={ cfhGeneral 3}--
-- Fabric Plane Group
--cfhPlaneTable OBJECT-TYPESYNTAXSEQUENCEOF CfhPlaneEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table containing information about fabric plane
state and statistics in the managed system."::={ cfhPlane 1}cfhPlaneEntry OBJECT-TYPESYNTAX CfhPlaneEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The information regarding a single fabric plane.
An entry of this table is created when the fabric plane
related hardware is detected by fabric software in the
managed system."INDEX{ cfhPlaneId }::={ cfhPlaneTable 1}
CfhPlaneEntry ::=SEQUENCE{
cfhPlaneId CfhPlane,
cfhPlaneAdminStatus CfhAdminState,
cfhPlaneOperStatus INTEGER,
cfhPlaneTotalBundles Unsigned32,
cfhPlaneDownedBundles Gauge32}cfhPlaneId OBJECT-TYPESYNTAX CfhPlane
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The fabric plane identifier. A unique value, greater
than zero, for each fabric plane hardware that is detected
by the fabric software in the managed system. It is
recommended that values are assigned contiguously
starting from 1. The value for each fabric plane ID must
remain constant from one re-initialization of the entity's
network management system to the next re-initialization."::={ cfhPlaneEntry 1}cfhPlaneAdminStatus OBJECT-TYPESYNTAX CfhAdminState
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION
"This object controls whether the fabric plane should be
brought 'down' or 'up'."::={ cfhPlaneEntry 2}cfhPlaneOperStatus OBJECT-TYPESYNTAXINTEGER{up(1),down(2),mcastDown(3)}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object indicates the current fabric plane operational
status.
up - The plane is fully 'up' (i.e., the plane can pass
both unicast and multicast traffic).
down - The plane is fully 'down' (i.e., th plane can't
pass both unicast and multicast traffic).
mcastDown - The multicast state of the plane is 'down' (i.e.,
unicast traffic can pass though the plane but
multicast traffic can't)."::={ cfhPlaneEntry 3}cfhPlaneTotalBundles OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSread-only
STATUScurrentDESCRIPTION"The total number of fabric bundles in the fabric plane."::={ cfhPlaneEntry 4}cfhPlaneDownedBundles OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The current number of downed fabric bundles in the
fabric plane."::={ cfhPlaneEntry 5}cfhPlaneStatsTable OBJECT-TYPESYNTAXSEQUENCEOF CfhPlaneStatsEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table containing statistics information for the fabric
planes in the managed system. Discontinuities in the value of
all statistics counters in this table might occur if chassis
removal or re-initialization occurs in a managed system.
The value of cfhPlaneStatsCounterDiscTime is updated when the
counter of fabric plane discontinuity occurs."::={ cfhPlane 2}cfhPlaneStatsEntry OBJECT-TYPE
SYNTAX CfhPlaneStatsEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The information regarding a single fabric plane
related statistics."AUGMENTS{ cfhPlaneEntry }::={ cfhPlaneStatsTable 1}
CfhPlaneStatsEntry ::=SEQUENCE{
cfhPlaneStatsRxDataCells Counter64,
cfhPlaneStatsTxDataCells Counter64,
cfhPlaneStatsRxCECells Counter32,
cfhPlaneStatsRxUCECells Counter32,
cfhPlaneStatsRxPECells Counter32,
cfhPlaneStatsUnicastLostCells Counter32,
cfhPlaneStatsMulticastLostCells Counter32,
cfhPlaneStatsCounterDiscTime TimeStamp}cfhPlaneStatsRxDataCells OBJECT-TYPESYNTAXCounter64MAX-ACCESSread-onlySTATUScurrent
DESCRIPTION"The accumulated number of data cells have been received by
all link receivers for this plane."::={ cfhPlaneStatsEntry 1}cfhPlaneStatsTxDataCells OBJECT-TYPESYNTAXCounter64MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The accumulated number of data cells had been transmitted
by all link transmitters for this plane."::={ cfhPlaneStatsEntry 2}cfhPlaneStatsRxCECells OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The accumulated number of correctable errored cells had
been received by all link receivers for this plane."::={ cfhPlaneStatsEntry 3}cfhPlaneStatsRxUCECells OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION
"The accumulated number of uncorrectable errored cells had
been received by all link receivers for this plane."::={ cfhPlaneStatsEntry 4}cfhPlaneStatsRxPECells OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The accumulated number of corrupted cells (e.g., parity
error was detected in the cells) have been received by all
fabric link receivers for this plane."::={ cfhPlaneStatsEntry 5}cfhPlaneStatsUnicastLostCells OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The accumulated number of unicast cell loss for this
plane. The lost cells are ones that had to be dropped
because of queue overflow, or some such reason."::={ cfhPlaneStatsEntry 6}cfhPlaneStatsMulticastLostCells OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrent
DESCRIPTION"The accumulated number of multicast cell loss for this
plane. The lost cells are ones that had to be dropped
because of queue overflow, or some such reason."::={ cfhPlaneStatsEntry 7}cfhPlaneStatsCounterDiscTime OBJECT-TYPESYNTAXTimeStampMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The value of sysUpTime on the most recent occasion at
which all of fabric plane's counters suffered a
discontinuity. If no such discontinuities have
occurred since the last re-initialization of the local
management subsystem, then this object contains a zero
value."::={ cfhPlaneStatsEntry 8}--
-- Enhanced Benes fabric bundle Table
--cfhBundleTotal OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The total number of fabric bundles in the managed
system."::={ cfhBundle 1}
cfhBundleDowned OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The current number of downed fabric bundles in the
managed system."::={ cfhBundle 2}cfhBundleTable OBJECT-TYPESYNTAXSEQUENCEOF CfhBundleEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table containing information about fabric bundle
state and statistics in the managed system."::={ cfhBundle 3}cfhBundleEntry OBJECT-TYPESYNTAX CfhBundleEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The information regarding a single fabric bundle.
An entry of this table is created when the fabric bundle
related hardware is detected by fabric software in the
managed system."INDEX{ cfhBundleId }
::={ cfhBundleTable 1}
CfhBundleEntry ::=SEQUENCE{
cfhBundleId CfhBundle,
cfhBundleName SnmpAdminString,
cfhBundlePlane CfhPlane,
cfhBundleOperStatus INTEGER,
cfhBundleTotalLinks Unsigned32,
cfhBundleDownedLinks Gauge32,
cfhBundlePortLCRCardIndex PhysicalIndex,
cfhBundlePortLCRId Unsigned32,
cfhBundlePortSecondCardIndex PhysicalIndex,
cfhBundlePortSecondId Unsigned32}cfhBundleId OBJECT-TYPESYNTAX CfhBundle
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The fabric bundle identifier. A unique value, greater
than zero, for each fabric bundle hardware that is detected
by the fabric software in the managed system."::={ cfhBundleEntry 1}cfhBundleName OBJECT-TYPESYNTAXSnmpAdminStringMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The textual name of the interface. The value of this
object should be the name of the fabric bundle as assigned
by the fabric software and should be suitable for use in
commands entered at the device's `console'
The bundle name is a location string with the following
syntax <rack>/<slot>/<module>/<bundle port>.
Where <rack> is line card rack, <slot> is the fabric card
slot, <module> is fabric module and <bundle port> is the bundle
connector on the fabric card ofnor OIM"::={ cfhBundleEntry 2}cfhBundlePlane OBJECT-TYPESYNTAX CfhPlane
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The fabric bundle associated fabric plane."::={ cfhBundleEntry 3}cfhBundleOperStatus OBJECT-TYPESYNTAXINTEGER{up(1),
down(2)}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object indicates the current fabric bundle operational
status."::={ cfhBundleEntry 4}cfhBundleTotalLinks OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The total fabric links in the fabric bundle."::={ cfhBundleEntry 5}cfhBundleDownedLinks OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The current number of downed fabric links in the fabric
bundle."::={ cfhBundleEntry 6}cfhBundlePortLCRCardIndex OBJECT-TYPESYNTAXPhysicalIndexMAX-ACCESSread-only
STATUScurrentDESCRIPTION"The physical entity index of fabric card in the line card
rack for the line card rack bundle port of the fabric
bundle."::={ cfhBundleEntry 7}cfhBundlePortLCRId OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The fabric bundle port identifier of the physical fabric
bundle port that is on the cfhBundlePortLCRCardIndex
associated fabric card."::={ cfhBundleEntry 8}cfhBundlePortSecondCardIndex OBJECT-TYPESYNTAXPhysicalIndexMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The physical entity index of OIM in the fabric rack
or fabric card in line card rack (only apply to a two line card racks
system) for the second bundle port of the fabric bundle."::={ cfhBundleEntry 9}cfhBundlePortSecondId OBJECT-TYPESYNTAXUnsigned32
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The second fabric bundle port id of the physical fabric
bundle port that is on the cfhBundlePort2CardIndex
associated fabric card."::={ cfhBundleEntry 10}cfhBundlePortTotalNumber OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The total number of fabric bundle ports in the managed
system."::={ cfhBundlePort 1}--
-- Enhanced Benes fabric bundle port Table
--cfhBundlePortTable OBJECT-TYPESYNTAXSEQUENCEOF CfhBundlePortEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table contains one row per fabric bundle port that
contains the port state and the aggregation information of
traffic and error statistics. The total number of fabric
bundle ports is given by the value of cdfhBundlePortNumber."
::={ cfhBundlePort 2}cfhBundlePortEntry OBJECT-TYPESYNTAX CfhBundlePortEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The information regarding a fabric bundle port.
An entry of this table is created when a fabric bundle port
is detected by the fabric software. The entry is removed
when the fabric bundle port associated card is removed."INDEX{ entPhysicalIndex, cfhBundlePortId }::={ cfhBundlePortTable 1}
CfhBundlePortEntry ::=SEQUENCE{
cfhBundlePortId Unsigned32,
cfhBundlePortAdminState CfhAdminState,
cfhBundlePortOperState INTEGER,
cfhBundlePortGrpId CfhBundle
}cfhBundlePortId OBJECT-TYPESYNTAXUnsigned32(1..4294967295)MAX-ACCESSnot-accessible
STATUScurrentDESCRIPTION"A unique value, greater than zero, for each fabric bundle
port on a fabric card or OIM."::={ cfhBundlePortEntry 1}cfhBundlePortAdminState OBJECT-TYPESYNTAX CfhAdminState
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The object controls whether the fabric bundle port should be
brought 'up' or shut 'down' administratively.
up - bring up all fabric link transmitters and/or receivers
of the fabric bundle port.
down - shut down all fabric link transmitters and/or receivers
of the fabric bundle port.
"::={ cfhBundlePortEntry 3}cfhBundlePortOperState OBJECT-TYPESYNTAXINTEGER{unknown(1),up(2),down(3)}MAX-ACCESSread-onlySTATUScurrent
DESCRIPTION"The object indicates the operational state of
the fabric bundle port.
unknown - the bundle port state is unknown or in the
transition between 'up' and 'down' state.
up - bundle port operates normally
down - bundle port was downed due to error condition or
administratively shutdown."::={ cfhBundlePortEntry 4}cfhBundlePortGrpId OBJECT-TYPESYNTAX CfhBundle
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The identifier of a fabric bundle that is associated to this
fabric bundle port."::={ cfhBundlePortEntry 5}cfhBundlePortStatsTable OBJECT-TYPESYNTAXSEQUENCEOF CfhBundlePortStatsEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table contains the traffic and error statistics for
fabric bundle ports."::={ cfhBundlePort 3}cfhBundlePortStatsEntry OBJECT-TYPE
SYNTAX CfhBundlePortStatsEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The information regarding a fabric bundle port statistics."AUGMENTS{ cfhBundlePortEntry }::={ cfhBundlePortStatsTable 1}
CfhBundlePortStatsEntry ::=SEQUENCE{
cfhBundlePortStatsRxDataCells Counter64,
cfhBundlePortStatsTxDataCells Counter64,
cfhBundlePortStatsRxCECells Counter32,
cfhBundlePortStatsRxUCECells Counter32,
cfhBundlePortStatsRxPECells Counter32,
cfhBundlePortStatsHighRxCECells Gauge32,
cfhBundlePortStatsHighRxUCECells Gauge32,
cfhBundlePortStatsHighRxPECells Gauge32}cfhBundlePortStatsRxDataCells OBJECT-TYPESYNTAXCounter64MAX-ACCESSread-onlySTATUScurrentDESCRIPTION
"The accumulated number of data cells have been received by
all link receivers for this port."::={ cfhBundlePortStatsEntry 1}cfhBundlePortStatsTxDataCells OBJECT-TYPESYNTAXCounter64MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The accumulated number of data cells had been transmitted
by all link transmitters for this port."::={ cfhBundlePortStatsEntry 2}cfhBundlePortStatsRxCECells OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The accumulated number of correctable errored cells had been
received by all link receivers for this port."::={ cfhBundlePortStatsEntry 3}cfhBundlePortStatsRxUCECells OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION
"The accumulated number of uncorrectable errored cells had
been received by all link receivers for this port."::={ cfhBundlePortStatsEntry 4}cfhBundlePortStatsRxPECells OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The accumulated number of corrupted cells (e.g., parity
error was detected in the cells) have been received by all
link receivers for this port."::={ cfhBundlePortStatsEntry 5}cfhBundlePortStatsHighRxCECells OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The highest accumulated number of correctable errored
cells that has been received on any single link in the
port."::={ cfhBundlePortStatsEntry 6}cfhBundlePortStatsHighRxUCECells OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrent
DESCRIPTION"The highest accumulated number of uncorrectable errored
cells that has been received on any single link in the
port."::={ cfhBundlePortStatsEntry 7}cfhBundlePortStatsHighRxPECells OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The highest accumulated number of corrupted cells
(e.g., parity error was detected in the cells) that has
been received on any single link in the port."::={ cfhBundlePortStatsEntry 8}cfhCardTable OBJECT-TYPESYNTAXSEQUENCEOF CfhCardEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table contains a list of fabric connection capable
cards for tracking fabric related status, usage and
statistics in the system."::={ cfhCard 1}cfhCardEntry OBJECT-TYPESYNTAX CfhCardEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The information regarding a fabric inuse state and
statistics. An entry of this table is created when a
fabric connection capable card is detected in the system.
The entry of this table is deleted when the card is
removed from the managed system."INDEX{ entPhysicalIndex }::={ cfhCardTable 1}
CfhCardEntry ::=SEQUENCE{
cfhCardFabInUse TruthValue,
cfhCardFabUsage CfhScaledPercentage,
cfhCardFabInUseDiscTime TimeStamp}cfhCardFabInUse OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object indicates if the fabric is in use by the card
(i.e., the card can sustain the fabric control traffic via
one or more fabric planes of the card). If the value of this
object is 'true', then the fabric is in use by the card,
otherwise it is not."::={ cfhCardEntry 1}
cfhCardFabUsage OBJECT-TYPESYNTAX CfhScaledPercentage
UNITS"thousandths of a percent"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The scaled percentage of elapsed time that the fabric has been
in use by the card (has sustained fabric control traffic to
the fabric) over the time interval since the last
'discontinuity' in its measurement time. That is, the interval
is restarted whenever the value of cfhCardFabInUseDiscTime is
changed."::={ cfhCardEntry 2}cfhCardFabInUseDiscTime OBJECT-TYPESYNTAXTimeStampMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The value of sysUpTime on the most recent occasion at
which the cfhCardFabUsage (fabric inuse usage) suffered
a discontinuity in its measurement. If no such discontinuity
has occurred since the last re-initialization of the local
management subsystem, then this object contains a zero value."::={ cfhCardEntry 3}cfhCardPlaneTable OBJECT-TYPE
SYNTAXSEQUENCEOF CfhCardPlaneEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table contains the connectivity information of a card
to a fabric plane in a system."::={ cfhCard 2}cfhCardPlaneEntry OBJECT-TYPESYNTAX CfhCardPlaneEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The information regarding the connectivity of a card
to a fabric plane.
An entry of this table is created when the card associated
fabric plane is detected by the fabric software.
The entry of this table is deleted when the card is removed
from the managed system."INDEX{ entPhysicalIndex, cfhPlaneId }::={ cfhCardPlaneTable 1}
CfhCardPlaneEntry ::=SEQUENCE{
cfhCardPlaneTxConnectivity TruthValue,
cfhCardPlaneRxConnectivity TruthValue}cfhCardPlaneTxConnectivity OBJECT-TYPE
SYNTAXTruthValueMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object indicates if a card can transmit
data via a fabric plane on the card. If the value of this
object is 'true', the card can transmit data via
the fabric plane; otherwise it is not."::={ cfhCardPlaneEntry 1}cfhCardPlaneRxConnectivity OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object indicates if a card can receive
data via a fabric plane on the card. If the value of this
object is 'true', the card can transfer data via
the fabric plane; otherwise it is not."::={ cfhCardPlaneEntry 2}--*******************************************************************
-- Notifications
--*******************************************************************cfhPlaneStateNotification NOTIFICATION-TYPEOBJECTS{
cfhPlaneOperStatus
}STATUScurrent
DESCRIPTION"Fabric plane operational state change notification.
This notification is sent when the fabric plane operational
state transition occurs."::={ cfhMIBNotifications 1}cfhBundleStateNotification NOTIFICATION-TYPEOBJECTS{
cfhBundleOperStatus,
cfhBundlePlane,
cfhBundleName
}STATUScurrentDESCRIPTION"Fabric bundle operational state change notification.
This notification is sent when the cfhBundleOperStatus
state transition occurs."::={ cfhMIBNotifications 2}cfhBundleDownedLinkNotification NOTIFICATION-TYPEOBJECTS{
cfhBundleOperStatus,
cfhBundlePlane,
cfhBundleDownedLinks,
cfhBundleName
}STATUScurrentDESCRIPTION"Fabric bundle link notification.
This notification is sent if the value of cfhBundleOperStatus
is 'up' and the value of cfhBundleDownedLinks is changed from
0 to nonzero or from non-zero to zero."::={ cfhMIBNotifications 3}
cfhMIBConformance OBJECTIDENTIFIER::={ ciscoFabricHfrMIB 3}cfhMIBCompliances OBJECTIDENTIFIER::={ cfhMIBConformance 1}cfhMIBGroups OBJECTIDENTIFIER::={ cfhMIBConformance 2}-- compliance statementscfhMIBCompliance MODULE-COMPLIANCESTATUScurrentDESCRIPTION"The compliance statement for entities which
implement the CISCO-FABRIC-HFR-MIB"MODULE-- this moduleMANDATORY-GROUPS{ cfhGenInfoGroup,
cfhPlaneGroup,
cfhBundleGroup,
cfhBundlePortGroup,
cfhCardGroup }GROUP cfhNotificationsGroup
DESCRIPTION"This group is mandatory for the system that supports
fabric plane and bundle features."
::={ cfhMIBCompliances 1}-- units of conformancecfhGenInfoGroup OBJECT-GROUPOBJECTS{
cfhGenPlaneStateTrapEnable,
cfhGenBundleStateTrapEnable,
cfhGenBundleDownedLinkTrapEnable
}STATUScurrentDESCRIPTION"A collection of objects providing the general Enhanced Benes
fabric related configuration and statistics capability."::={ cfhMIBGroups 1}cfhPlaneGroup OBJECT-GROUPOBJECTS{
cfhPlaneAdminStatus,
cfhPlaneOperStatus,
cfhPlaneTotalBundles,
cfhPlaneDownedBundles,
cfhPlaneStatsRxDataCells,
cfhPlaneStatsTxDataCells,
cfhPlaneStatsRxCECells,
cfhPlaneStatsRxUCECells,
cfhPlaneStatsRxPECells,
cfhPlaneStatsUnicastLostCells,
cfhPlaneStatsMulticastLostCells,
cfhPlaneStatsCounterDiscTime
}STATUScurrentDESCRIPTION
"A collection of objects providing the fabric plane
statistics information."::={ cfhMIBGroups 2}cfhBundleGroup OBJECT-GROUPOBJECTS{
cfhBundleTotal,
cfhBundleDowned,
cfhBundleName,
cfhBundlePlane,
cfhBundleOperStatus,
cfhBundleTotalLinks,
cfhBundleDownedLinks,
cfhBundlePortLCRCardIndex,
cfhBundlePortLCRId,
cfhBundlePortSecondCardIndex,
cfhBundlePortSecondId
}STATUScurrentDESCRIPTION"A collection of objects providing the fabric bundle
state and statistics information."::={ cfhMIBGroups 3}cfhBundlePortGroup OBJECT-GROUPOBJECTS{
cfhBundlePortTotalNumber,
cfhBundlePortAdminState,
cfhBundlePortOperState,
cfhBundlePortGrpId,
cfhBundlePortStatsRxDataCells,
cfhBundlePortStatsTxDataCells,
cfhBundlePortStatsRxCECells,
cfhBundlePortStatsRxUCECells,
cfhBundlePortStatsRxPECells,
cfhBundlePortStatsHighRxCECells,
cfhBundlePortStatsHighRxUCECells,
cfhBundlePortStatsHighRxPECells
}STATUScurrentDESCRIPTION"A collection of objects providing the fabric bundle
Port state and statistics information."::={ cfhMIBGroups 4}cfhCardGroup OBJECT-GROUPOBJECTS{
cfhCardFabInUse,
cfhCardFabUsage,
cfhCardFabInUseDiscTime,
cfhCardPlaneTxConnectivity,
cfhCardPlaneRxConnectivity
}STATUScurrentDESCRIPTION"A collection of objects providing the fabric connectivity
management information."::={ cfhMIBGroups 5}cfhNotificationsGroup NOTIFICATION-GROUPNOTIFICATIONS{
cfhPlaneStateNotification,
cfhBundleStateNotification,
cfhBundleDownedLinkNotification
}
STATUScurrentDESCRIPTION"The notifications of ciscoFabricHfrMIB that are
required to implement."::={ cfhMIBGroups 6}END